Viewing 4 topics - 1 through 4 (of 4 total)
-
- Topic
- Voices
- Replies
- Last Post
-
-
Pre-War Streamliner (PGP+) Pre-War Streamliner (PGP+) v1.0 Eligible Hard Body Models: Any model that competed in a state or club sanctioned road, rally, endurance race or a grand prix between the years 1900 through to 1939 anywhere in the world; Low Power BWMS050 Motor Only; Any Inline Chassis; Wheels: Must not exceed 16.5 mm in diameter and 5.5 mm in width; Tires: DArt urethane club series (DA0210 recommended). Tires must not exceed 23 mm in diameter; and Maximum Width: 51mm (actually 50.8 mm – excluding fenders or insert detail which may extend beyond).
Started by:
in: R32 Class Criterium
- 1
- 0
- 6 months ago
-
Boulevard Cruiser (BC) Boulevard Cruiser (BC) v1.0 Eligible Hard Body Models: Any 1955 through 1963 full size American car. Gunze, Sangyo, Revell and AMT brands are highly recommended. Personalized licence plates are strongly encouraged while race numbers are not necessary (and in fact discouraged). Motor: BWNC1 Chassis: Any in any configuration Front and Rear Tires: Any DArt Club Series Urethane Tire [DArt D7 (black or white walls) strongly recommended]
Started by:
- 1
- 0
- 1 year ago
-
Indy Roadster (IR) Indy Roadster (IR) v1.0 Eligible Hard Body Models: Any true, front engined roadster that tested, registered, qualified or participated in any Indy 500 race from 1950 onwards. Eligible Liveries: Authentic liveries are encouraged but fantasy liveries that maintain a look (paint colours, fonts and graphics) representative of the period that they raced are allowed. Motor: BWMS050. Chassis: Any inline front motor configuration where the complete motor 'can' is forward of the base of the windscreen. The motor may be offset. The motor shaft extension may use additional bushings/bearings and be directly attached to the motor shaft with any flexible coupling (such as a spring or soft tubing) or be offset using any gearing. Minimum Weight: 80g Maximum Overall Width: 54mm Tires: Any sized DArt Club Series urethane tires with a reasonable scale appearance. [DArt D7.5 strongly recommended]
Started by:
- 1
- 0
- 1 year ago
-
Hot Rod (HR) Hot Rod (HR) v5.0 Eligible Models: Any model with or without fenders; Chassis: Any inline chassis; Motor: BWMS050; Tires: Any size DArt Club Series urethane tire (ie. SC0120 (rear) & SC0120F (front) recommended); Maximum width of front and rear rolling assemblies (track) is 50.8mm but bodies/fenders may be wider; and At least one racing number.
Started by:
- 1
- 0
- 2 years ago
Viewing 4 topics - 1 through 4 (of 4 total)
-