Topic Tag: Decals

Home /
Viewing 4 topics - 1 through 4 (of 4 total)
    • Topic
    • Voices
    • Replies
    • Last Post
    • David Piper Sandeman & Castrol GTX Just some of the images I used to make up my Sandeman decals along with some Castrol GTX stripes and logo... attached below in an MSWord file so you can manipulate and change numbers, names, etc. - hopefully you have the same fonts installed... if not I can upload a .pdf file too...

      Started by: Arthur in: Decals

    • 1
    • 0
    • 6 years ago

      Arthur

    • Spray Can Nozzle Maintenance – Krylon Matte Finish Those of you using Krylon Matte Finish to seal your decals or anything else may have nozzles that get clogged even though the last time you used it you cleared the nozzle by depressing it holding the can upside down until it 'cleared'... If so, and you've made sure you've warmed your bomb, but it still fires blanks or spits unevenly then pull off the nozzle, dip in acetone and re-install... should work as good as new. I would think this works for many other bombs as well... BTW, for the Tamiya TS line of spray bombs you don't need to clear the nozzle (wasting contents) after each use - their nozzles never clog with normal use.

      Started by: Arthur in: How To – Paint It

    • 2
    • 1
    • 7 years ago

      Avatar photoMiA

  •  

Viewing 4 topics - 1 through 4 (of 4 total)