Topic Tag: McLaren M1B

Home /
Viewing 2 topics - 1 through 2 (of 2 total)
    • Topic
    • Voices
    • Replies
    • Last Post
    • DArt McLaren M1B This M1B prototype got moved to the front of the build line. The plan is to standardize the M1B for DArt body/KRZ chassis quick-build kits in the near future. Chassis will be designed for slim-line motors to sit flat without the use of any spacers. A new paint-booth is under way. I decided to undo the mess I made in the basement kitchen before it became permanent. Anyone would have a hard time to figure out dozens of cars were painted there now. This prototype has CX0201 tires with 13x7 wheels on the front. The next prototype will have RM0201 tires with 13x5 wheels on the front.

      Started by: Avatar photoKen in: Scratch Built Models

    • 7
    • 26
    • 2 years ago

      Avatar photoKen

    • Strombecker McLaren M1B     Strombecker made some of the nicest molds, and the McLaren M1B, was one of their nicest, and very much to scale,....it is a tiny little bugger !! It really does not look all that great in stock form, sitting high, and without any details/decals. Anyway, it has been sitting in my workroom for eons, and with the forced hometime we are all enduring, I have decided to make it my next build. Trying to make this..............this one is not mine, unfortunately mine is a little worse for wear.......... Into something like this................so a few bits to be made/added. I started with the chassis, as I find these the easy part of the job..........a simple single rail chassis with .047 main rails, set for 2mm+ clearance with 19+ mm tyres. This will be powered by a  FF050 motor. I have started the bodywork........removed all bits, opened the vents, (as they should be , they were closed in the original), and added a front diaplane, and a rear spoiler. Still a lot of clean up to do...........but the rear molded in screens/vents have been opened as on the original. The car is tiny,....I think I mentioned that,.....luckily the shortest wheelbase setting on my jig was perfect !! Still miles to go, but, I will post updates...... Stay Safe Chris Walker

      Started by: Anonymous in: Scratch Built Models

    • 7
    • 30
    • 3 years ago

      Anonymous

  •  

Viewing 2 topics - 1 through 2 (of 2 total)