Topic Tag: Alfa Romeo

Home /
Viewing 3 topics - 1 through 3 (of 3 total)
    • Topic
    • Voices
    • Replies
    • Last Post
    • Alfa Romeo at the 1954 Carrera Panamericana Alfa Romeo at the 1954 Carrera Panamericana - by MiA - As Art was kind enough to set up a blog for my meanderings I felt I should give it a go. What to write about, how long should it be? Perhaps I could use a blog as an excuse to dig a little more into subjects I was interested in, and if anyone else learned a bit, then so much the better. Of course the first one would have to be a subject near and dear to my heart (and so as if you didn’t know) Alfa Romeos! But what Alfa story? As the company with the oldest racing history there are so many stories. So, where to start?? Lets just choose a convenient and timely one, the upcoming Carrera Panamericana proxy race. Over the five years that the race was held there were many Alfas to write about, both factory and private entries.  For a first go lets just use the alternate photo posted for the upcoming proxy race. Easy, a bit obscure, quite pedestrian and definitely all Alfa!! I’m sure Art put it in for my benefit!! [caption id="" align="aligncenter" width="911"] Monumento de la Revolition[/caption] A little bit of background on the Carrera Panamericana first. In 1950, Mexico became the first Latin-American country to complete its part of the Pan-American Highway. To celebrate this achievement, the national government decided to organize a five-day race along the new road. It consisted of a total of 9 stages and ran from Ciudad Juárez on the US border to the Guatemalan border. The original version of the Carrera Panamericana was held from 1950 to 1954 and during its short existence it developed a reputation for being one of the most dangerous races in the world. Due to the start line being close to the US, most of the cars and drivers for the first 1950 race came from the US. The first winners were an American team of Hershel McGriff and Ray Elliott in an Oldsmobile 88. From the second edition onwards, the route was switched, going from the southern to the northern border. Over the ensuing years competition grew and attracted more teams from abroad. Along with most American manufacturers and many ‘specials’, Ferrari, Lancia, Porsche, Borgward, Alfa Romeo, Austin Healey, OSCA, Jaguar, Mercedes, Talbot Lago, Gordini, VW and Pegaso all sent or supported teams headlined with seasoned road, track and rally drivers. Of particular interest here is the 1954 race and the picture used for the alternate in the upcoming proxy races announcement. (Hopefully Alfas from other years will follow in later posts). 1954 was the last of the original races and the picture was taken in front of the Monumento de la Revolition in Mexico City, probably sometime after the third day of racing or just before the start of the fourth day. The Monumento de la Revolition commemorates the independence of Mexico from Spain. It is located in Plaza de la República, near to the heart of major thoroughfares in downtown Mexico City. [caption id="" align="aligncenter" width="511"] Monumento de la Revolition[/caption] The structure was initially intended to be at the centre of the Federal Legislature and the first stone was laid in 1910 during the centennial celebrations of Independence. The project was not finished due to the Mexican Revolutionary War and after several regime changes in 1913 it was cancelled and abandoned. It’s steel inner structure stood rusting for more than twenty years. Later it was proposed to convert the abandoned structure into a monument to the heroes of the Mexican Revolution. After this was approved, the structure began its makeover. Four stone sculpture groups were designed and built over the existing cupola structure. The structure also functions as a mausoleum for the heroes of the Mexican Revolution of 1910. It was eventually completed around 1938. For the 1954 running there were thirteen Alfas entered. Eleven participated and 2 were listed as Did Not Arrive. No. Drivers Entrant Make Type Model Engine Gr. 251 Sanesi / Cagna Alfa Romeo Finmeccanica Alfa Romeo 1900 TI Alfa Romeo TE1.9 252 Velazquez / Ruiz Atoyac Alfa Romeo 1900 TI Alfa Romeo TE1.9 254 Mancini / Mijares Anaconda Nacional Alfa Romeo 1900 TI Alfa Romeo TE1.9 255 Carini / Sambrotta Alfa Romeo Finmeccanica Alfa Romeo 1900 TI Alfa Romeo TE1.9 256 Mantovani / Chiappa Alfa Romeo Finmeccanica Alfa Romeo 1900 TI Alfa Romeo TE1.9 257 Solana / Leguizamo Alfa Romeo Finmeccanica Alfa Romeo 1900 TI Alfa Romeo TE1.9 258 Pedro J. Llano Pedro J. Llano Alfa Romeo 1900 TI Alfa Romeo TE1.9 260 Guillermo G. Airaldi Guillermo Airaldi Alfa Romeo 1900 TI Alfa Romeo TE1.9 265 Cerezo / Palacios David Cerezo Alfa Romeo 1900 TI Alfa Romeo TE1.9 267 Della Favera / Campigotto Alfa Romeo Finmeccanica Alfa Romeo 1900 TI Alfa Romeo TE1.9 268 Bonini / Zanavoni Alfa Romeo Finmeccanica Alfa Romeo 1900 TI Alfa Romeo TE1.9 And entered but did not arrive: 264 Pedro J. Llano Pedro J. Llano Alfa Romeo 1900 TI Alfa Romeo TE1.9 266 Enrique Fluchaire Enrique Fluchaire Alfa Romeo 1900 TI Alfa Romeo TE1.9 Clearly shown in the picture are four Alfa Romeo 1900 Ti cars. Quite possibly these are four of the five cars entered by Finmeccanica. The 5th Finmeccanica entered car is possibly the car to the right in the photograph. Like many of the early automobile manufacturers Alfa Romeo had gone through turbulent times since it’s inception. Ugo Gobbato the head of Alfa Romeo in 1945 had been shot and killed by an unknown gunman as he cycled to work. Thus after WW2 Alfa thus found itself without a leader and with most of its factories destroyed by the war. A new chairman, Pasquale Gallo, was appointed to demilitarize Alfa Romeo, and responsibility for design was handed to the engineer Orazio Satta Puliga. He made significant contributions towards re-launching Alfa Romeo into a new era. After introducing several upscale models based on pre war models, in 1950 he introduced the Alfa Romeo 1900, a family car that would be capable of winning races. Modern and practical, Puliga considered the 1900 to be the ultimate choice for the middle class. It offered great performance and a heritage of brilliant sporting achievements at a competitive price. [caption id="" align="aligncenter" width="781"] Alfa Romeo 1900 Sedan (Berlina)[/caption] The Alfa Romeo 1900 was produced from 1950 to 1959. It was an important development for Alfa, being it’s first car built entirely on a production line and it’s first production car without a separate chassis. The Engine was a 1.9 L DOHC Inline 4, developing 90 bhp, which was later enlarged to 2.0L It was produced in several variants, a 4-door saloon (Berlina), a 2-door coupé (Sprint) and a 2-door convertible. It was the first Alfa Romeo offered with left-hand drive. After introduction it was later offered as a 1900C(Short) and then as a 1900TI with a more powerful motor producing 100bhp. Later came Super and Super Ti versions. A total of 21,304 were built during the production run, including 17,390 of the saloons. The chassis was designed specifically to allow it to be re-bodied and several coachbuilders developed some beautiful variants, including a 4-wheel drive version (Matta) based on the 1900. Finmeccanica, the entrant of the cars we are interested in was established in 1948 as part of the efforts by Italy's government-controlled industrial holding company IRI (Istituto per la Ricostruzione Industriale) to restructure Italy’s devastated industrial and engineering sector after the war. IRI had itself taken over effective control of Alfa around 1928 when Nicola Romeo left the company. After it’s establishment Finmeccanica effectively became Alfa Romeo’s parent company until it sold Alfa to the Fiat Group in 1986. The 1954 race was run from south to north over 8 stages and 3,070 kilometres (1,910 mi). 150 cars started the race, and 85 finished all 8 stages. The European stock car class was won by Consalvo Sanesi and Giuseppe Cagna in Alfa Romeo #251 finishing 15th overall. [caption id="" align="aligncenter" width="438"] 1900 Motor[/caption] [caption id="" align="aligncenter" width="414"] Finned Aluminium Brake Drum[/caption] [caption id="" align="aligncenter" width="464"] Finishing Line[/caption] Other Alfa finishers were car # 256 driven by Mantovani / Chiappa finishing 18th overall, car # 267 driven by Della Favera / Campigotto finishing 19th overall, car # 255 driven by Carini / Sambrotta finishing 20th overall, car # 252 driven by Velazquez / Ruiz finishing 30th overall. Car # 268 driven by Bonini / Zanavoni was a DNF due to an accident. All considered, an excellent showing for Alfa. [caption id="" align="aligncenter" width="435"] Consalvo Sanesi and Giuseppe Cagna[/caption] [caption id="" align="aligncenter" width="370"] Carini/Sambrota in car #255[/caption] [caption id="" align="aligncenter" width="418"] The Velazquez / Ruiz car[/caption] [caption id="" align="aligncenter" width="412"] The Velazquez / Ruiz car[/caption] There are several good smaller scale models of most of the cars that participated in the 1954 race, but I haven’t found a 1/32 scale kit that could be used as the basis for an S32 car …yet. [foogallery id="33634"]

      Started by: Avatar photoMiA in: Vintage Slot Car Articles and Other Reference Materials

    • 5
    • 8
    • 2 weeks ago

      Arthur

    • 1933 Alfa Romeo 8c 2300 From the original Airfix Model Kit: If you can't read the fine print here it is: "Alfa-Romeo, one of the most famous of the Italian car companies and still one of the foremost manufacturers of high performance cars, started in 1907 building the Darracq under licence. After the First World War they introduced their own very successful series of sports and racing cars. The 1933 8C was a development of the 'Monza' racer of 1931 which won at Le Mans in 1931, 1932, 1933 and 1934 and this car was beaten into second place in 1935. The low four-seater sports body is typical of its era and the 2,336 c.c. supercharged twin overhead camshaft engine with its eight cylinders in line is also typical of the period. This model is based upon the car owned by the late Mike Hawthorn." So after doing a little research I decided that I would model a fantasy period livery in the same colour scheme as this 1:1 survivor (which is an 8c 2300 LM - with the round streamlined lid covering the spare tire(s)). A different version than the one I am building but I do like the extra single windscreens and since there were so many variants of this car that raced I will incorporate a pair of them on my model as well and leave the rest as is, including the uncovered spare tire. Racing number and pilot can be decided later... I do plan to paint the numbers in black. So after looking over everything I decided to start assembling (and welding) what I should in order to be able to sort out the dimensions for the chassis keeping in mind that everything must still be painted - so not everything can be assembled until after paint - and it is first mated to the chassis. I decided to leave the rear fenders separate since I wouldn't be able to remove the body from the frame with them welded in place. So they along with the headlamps and other various bits will be painted separately and then epoxied together, as will the frame to the body. I cut a channel into the floor to accommodate a mid inline 'low power' slim can motor and will decide later if it will be covered with styrene or a flexible piece of metallic plastic sheet. A front motor build would be nice but they are too much work and I would still need to cut away a portion of the interior - so why bother. Stock frame/suspension pieces such as leaf springs will be added to the frame or chassis after the chassis is built. Front axle/assembly will be determined on the fly as I build the chassis - I may use independent pins for each front wheel but we'll see. In any event I plan to use and incorporate the following parts into this build: BWMS050 motor w/10t true pitch pinion & 23t slot.it crown; Slot.It round 'self centering' bushings with PM axles & spacers/washers (I like the very small size of these bushings); Scalextric 'stock' round guide with quick change plate & Slot.It braid; DArt wheels, tires & inserts plus DArt windscreens & pilot; and Various K&B brass stock & wire. I was thinking about adding LED head and tail lights but that might be too ambitious right now - hopefully there is plenty of time in the future... Next Step: Building the Chassis (stay tuned...)

      Started by: Arthur in: Scratch Built Models

    • 8
    • 19
    • 2 years ago

      Arthur

  •  

Viewing 3 topics - 1 through 3 (of 3 total)