Viewing topic 1 (of 1 total)
-
- Topic
- Voices
- Replies
- Last Post
-
-
Bugatti Type 35B Airfix conversion Prewar open wheel cars anyone ? After the Can Am I took the opportunity to test my new Airfix Bugatti. This project has been on and off the bench for the last 10+ years. Considering the narrow tires and wheels and high ride height this simple wire chassis went better than expected. Lap times in the high 7 seconds. Present motor is an unusual half length narrow can which I wanted to try out. I'm going to switch it out for a BWA for comparison for the next test. Wheels and inserts are from Studio 64. Wheels are actually cast in a hard resin which I drilled and tapped for set screws. They seem strong enough to not slip on the axle in this low speed application. Tires are D'art hobbies special order. Molycote chrome pen was used for some of the metallic highlights. Strangely the kit came with 2 left windscreens and no rt. so I custom fabricated a mount in order to position the windshield in the more streamlined down position on the right side as it was often raced. It had pretty good torque but not a lot of braking. Maybe why our driver needs the hand brake lever outside the car. It also needs some race numbers. Thinking I might number it with 22 of 1930 Monaco race winner Rene Dreyfus who famously defeated favorite Louis Chiron by using an extra added fuel tank to avoid stopping in the pits. Video here: https://www.youtube.com/watch?v=kwHavvwJB7E Thanks to Art for his great photos!
Started by:
in: Scratch Built Models
- 6
- 8
- 6 years ago
Viewing topic 1 (of 1 total)
-
