Inserts – The Happy Canadian Scale Modeler

Viewing 2 topics - 1 through 2 (of 2 total)

- Topic
- Voices
- Replies
- Last Post
- Monday April 3, 2023 @ 7pm – Wheel Inserts 101 Gents, Now that the worst of covid is behind us and we get back into full blown racing I thought it best to start off slow with something that might be useful for almost everyone. Most of the models we scratch build use wheels that require inserts so it makes sense to start with something so common. And the techniques used to paint and weather inserts can be used for many other parts of a build too. Wheel inserts are usually the last part of any build to be completed. Often they are just given a single splash of paint and then installed as is. But you can use them to help make your model really pop - and should - since it is so easy to do! Here I will do my best to show everyone how I prepare, paint, weather & install inserts. As with most aspects of our hobby there is no right or wrong way. Furthermore, you may have some very helpful tips and tricks to add to our workshop, so please do! During this workshop we'll work on any inserts that are purchased so if you need inserts for a current project you'll get them finished and ready to go! If you bring your wheels I'll show you how I would install them too! NOTE: If a set of inserts need a shot of Tamiya or Chrome please let me know in advance so that I can prime and spray them the night before so that they are already dry for us to work on. Make sure to RSVP your spot in the calendar because space is limited. Thanks for browsing!!!
  Started by: Arthur in: How To – Paint It
- 2
- 2
- 1 month ago
  Ken
- D’Art inserts in Slot.It wheels made easy I have some regular Slot.It wheels and wanted to install a specific D'Art insert that's only supposed to fit a standard RS-Slot wheel. I bought a package of standard Slot.It inserts and gently sanded down the spokes to pop out the center and expose the outer ring by itself. It was easy to press the D'Art insert into the ring. I could not get the inserts out of the rings once they were pressed in. I'll use a drop of glue to make sure they don't move. I used 150-grit sand paper. It took 15-minutes of sanding by hand to get the spokes out from the outer rings. The belt sander would have disolved/melted the inserts in seconds. Slow is sometimes better. Now anyone can install just about any standard 14mm D'Art insert in almost any 15"-inch Slot.It wheel. The sky is the limit. Thanks for looking, Ken
  Started by: Ken in: How To – Build It
- 2
- 2
- 3 years ago
  Ken