Viewing topic 1 (of 1 total)
-
- Topic
- Voices
- Replies
- Last Post
-
-
Mini-Z Light Kit Socket Mapping and Connector For anyone interested in making their own Mini-Z light kit here is a pin map for the onboard ZH 1.5mm 4 pin light socket: Remember that the headlight circuit is controlled by a trim knob on the KT531P transmitter which can adjust the headlight LEDs from a slow flashing to constant on while the brake circuit is controlled by the throttle trigger which makes the red tail lights become brighter when the brakes are applied. You can find the connector on Amazon which comes with pre-crimped wires: 3mm 3v LEDs seem to be the best bet for most head/tail lamp openings. You can use them without adding resisters. Since they don't draw much power you can add as many as you want. Experimenting with other power sources (from the gyro socket or any other onboard tabs) may give interesting LED options even if those additional circuits would need to include a resister.
Started by:
in: Helpful Mini-Z Tips, Tricks & Hacks
- 1
- 0
- 1 month ago
Viewing topic 1 (of 1 total)
-