Search for: searching... Viewing 10 topics - 1 through 10 (of 10 total) Topic Voices Replies Last Post Red Monogram Cooper Ford Our Group-25 friend Ted modified and painted this Cooper Ford in a Canadian livery. This was Ted's inspiration for the build. Started by: Ken in: Scratch Built Models 4 3 9 months ago Joe 59 Fairlane 500 Skyliner – Police car? Art and I recently talked about adding another dimension to the street racing theme. Having a police cruiser to chase the other cars. The chase car gets a head start. You have to stop and count your laps when the police cruiser catches up to you. I'm pretty sure a Skyliner hardtop/convertible was never made into a police cruiser. But it's a 59 Fairlane 500 none the less. I installed the chassis before the rear fender skirts. The body height at the front of the rocker panel is a respectable 3mm. It's even more respectable at 4mm for the rear of the rocker panel. I thought based on the front wheel housing that the car didn't look very low. Then I installed the rear fender skirts. Those added skirts make the back of the car look low. Such is life. The factory hub caps look great on a police car. Started by: Ken in: Scratch Built Models 7 27 3 years ago JMSracer Jag XK120 Carrera Panamericana This build was inspired by DB's white XK120. He also gave me the body. Thanks Dave! I was looking to build another Carrera Panamericana car. I found a gentleman by the name of Frank Hern that drove an XK120 in the 1952 race. He did not finish due to an accident. It's my least favorite colour. But "British Racing Green" is extemely accurate for the times of the Carrera Panamericana. :wacko: I love the spats! D'Art blue dot tires on old CB wheels. Use what you got! Started by: Ken in: Scratch Built Models 4 13 3 years ago Felix 1956 Ferrari Bardahl Indi-500 Special With the Indi-500 event drawing closer. Some poor guinea pig needs to sort out the rough edges of the class. I came across someone that bought this Geodies resin body and didn't start it. A lucky break. A blind chicken gets a kernel of corn every now and again. That hand written note about using heavy wire as exhaust pipes are the only instructions. You need to figure out the wheelbase and everything else on your own. A windshield was not included in this kit. The wheels, driver, and steering wheel make nice heavy paper-weights. The body weighs 23-grams by itself. It's a bit rough with several pin-holes and buldges. But you can't beat the price. I'm told resin bodies are a bit like egg shells in how they can easily break. 50.8mm max track width might be a tad too narrow for this slow and heavy class. But axles are easy enough to adjust. I'm going to start at 55mm track width and see how it looks. I can cut more off, but can't add it back on if I start too short. We'll find out what the consensus is after the car is built and everyone has had a look at it. I need to sort out the motor and drive shaft next. Where there's a will, there's a way. "Willoughby will, when nobody will!" Or something like that. Ferrari called this car experimental. They weren't kidding. It surely has become an S32 experiment. Started by: Ken in: Scratch Built Models 5 20 3 years ago Ken 66 Shelby Mustang I was asked to build a car for a friend. What better way to pass the time. The body is a Monogram GT-350. I have the exact same car in white. It was a fun way to test the accuracy of the original drawing. The request was "Keep it low, but keep it level". Thanks for looking Started by: Ken in: Scratch Built Models 2 3 4 years ago Ken D'Art Porsche RS61 We recently had a workshop where 3-bodies were painted as part of the demonstration. With the Player's 200 coming up. The RS61 fits in perfectly with the field of cars. My livery might be fantasy. But the colour is not. Art. Thank you very kindly. It was a lot of fun to build a chassis for this body kit. :yes: I still need to complete the body and details. But it's ready to run so to speak. :good: The class is SP+. Started by: Ken in: Scratch Built Models 4 11 4 years ago Ken Chaparral 2D If I could have a race car on the street. This would be it. Nothing nicer looking to me than a Chaparral 2D. I was fortunate enough to find an old beat up and badly sun-baked Strombecker body at the last Group25 model show/swap meet. First thing to do is to disassemble the parts. The body is in rough shape. Full of scratches, and lots of faded plastic. The underside shows how badly discoloured the body is. Choosing a colour was easy. Out of all my cars so far, Tamiya Candy Lime Green is still the favorite. I'll let other club members fight over the white cars, and main liveries. I prefer to be different. Now to choose a motor, gear ratio, and wheels/tires. I hope to eventually build 3 of these Chaparrals. Two more are on order with D'Art Hobbies. Those will be way easier to acquire. Thank you kindly Art. Started by: Ken in: Scratch Built Models 2 10 4 years ago Ken Morris Mini Cooper I found a Morris Mini Cooper in the 1972 Targa Florio. I also found an appropriate car to get this project off to a good start. As you can see by the photo on the right, the car is "Plum Crazy Purple" in colour. That should be a cool addition to the other liveries. The drivers for car #51 were Matteo Sgarlata and Joe Anastasi. Class = S1.6. Sponsored by = STP. I need to open the wheel openings in the fenders to fit the 13"-inch wheels/tires. That will give me an opportunity to make those crazy looking fenders. The motor is a tight fit with the stock interior. I will need to get very creative with this little car if I want to lower it with bigger wheels, and still keep an interior with a driver. Fun looking car. It was a nice surprise to find out it has working head lights and tail lights. Since this build is not about speed. I'm going to try and keep them. Look out green Giliberti cause a purple Mini will be on the hunt! All in good fun of course. Started by: Ken in: Scratch Built Models 4 15 4 years ago Ken 1949 Ford Tudor in red With the Carrera Panamericana around the corner. It's time to give Fred and his blue Tudor a bit of a break. Emilio Portez Medina and Armando Rodrigues Morado, both from Mexico, are busy preparing a red 1949 Ford Tudor #119 for the next race (1950). Emilio's red Tudor has a BWNC1. Fred's blue Tudor has a BWMS050. Started by: Ken in: Scratch Built Models 3 7 4 years ago Ken 65 Mustang 2+2 My very first thread was February 2018. Before I knew how to scratch-build, I posted a pic of an Eldon Shelby GT350 that I put together using an old Hornsby plastic chassis. It ran like... an old Hornsby plastic chassis. What a surprise. You only get what you invest. It was unrealistic to hope for more. It was time to re-visit the old Mustang idea. But with a fresh start. This is an AMT static kit I painted at the cottage. This chassis was going to hang out more than any other on this car forcing me to re-invent the back section. It's not perfect. But it's an improvement. Started by: Ken in: Scratch Built Models 3 8 4 years ago Ken Viewing 10 topics - 1 through 10 (of 10 total) Thank You for Reserving Your Space! Thank you for successfully reserving your space. See you then! × Thank You for Your Entry! Thank you for successfully submitting your model entry form! Please remember to refresh your browser to see your entry listed in our Entries Received area. × Scratch32 - The Official Scale Modeling Site for Race and Rail Enthusiasts! uses cookies to personalise and improve your user experience. If you continue to use this website, you will be providing consent to our use of cookies.Accept