I don’t mind sharing that I was a bit nervous. Happy to do another workshop if everyone wants one.
Art suggested to put the reference notes here for everyone. This slightly ammended from last night.
Please keep in mind this is merely how I do things. Always keep safety first.
Tools and materials I use:
1) 8″inch drill press
2) Compound table (Kijiji, Amazon.com or Ebay)
3) 3/4″ aluminum square tubing (Home Depot)
4) #14 drill bit for reamer (KBC Tools)
5) #27 drill bit for guide (Slot-It CH-10 univeral guide)
6) 3/16″ reamer (KBC Tools)
7) 1/16″ pilot drill(KBC Tools)
8) Oil as cutting fluid
9) 1-2-3 blocks (Busy Bee Tools)
10) 2 x pieces of aluminum bar as clamps (Home depot)
11) 4 x Bolts and nuts for clamping
12) Flat, fine file
13) Band saw with 3/16″ metal blade
14) Digitial calipers
15) Black marker (wide)
16) Belt sander with rotary side disk
17) Safety glasses