Viewing 8 topics - 1 through 8 (of 8 total)
-
- Topic
- Voices
- Replies
- Last Post
-
-
Spray Booth Number Three My first spray booth was the basement kitchen fan with a big cardboard box. Overspray wasn't an issue since the basement was eventually going to be renovated. I painted about 60+ cars before having to make changes. After the renovations, I moved the spray area closer to the kitchen window. But the fan was actually higher in the room than the kitchen fan, and was less effective even with a much bigger fan. It moved the smelly air out of the room. But the overspray dust was like a cloud slowly moving to the floor. Let's just agree that it was a total failure. I painted one or two HO cars, and decided to undo everything. It was either outside, or nothing now. I needed to use gravity to my advantage. So far it's been working against me. I bought a wardrobe box from U-Haul for $19.95. It measures 24"x24"x48" inches closed. 60" inches tall with the top flaps open. It barely fits in the shower stall. I installed two 6" inch vents at the back to evacuate the fumes. A plywood plate was cut to perfectly fit into the window slot. Two 6" inch metal joiners were glued into the plywood plate for the flexible hose. The shower has a plastic drop-sheet lining the entire thing. You can't be too safe. I have hanging lights on both sides so I can see properly. Blocks were glued to keep the flaps open. The evacuation vents had to be staggered because they didn't quite fit beside each other. When the booth isn't being used. The plate and flexible ductwork are at rest beside the sink. It was finished last night. Ted came over with an unpainted Pioneer Mustang today, and the booth is an absolute success. The overspray cloud falls to the bottom of the box. Nothing escapes into the washroom itself except barely a light smell. You can't smell the fumes outside the washroom door with the door wide open. Perfect. The power for the booth comes from an old 24" inch fan. It moves enough air to easily dilute the fumes. I need to watch that I don't leave it running too long after painting. It removes a lot of warmth from the house very quickly. Thank you very kindly for looking.
Started by:
in: How To – Paint It
- 5
- 13
- 2 weeks ago
-
S24 Dec 16/23 With Christmas around the corner. It was good to finish off the year with some relaxing laps around the track with the bigger cars. There were a few cars missing, as well as a few new ones. Up first is Felix's Monte Carlo. Sittin' low and looking sharp on a brass chassis. Chris B showed up with two new cars. A '60 Starliner, and a '67 Comet Cyclone GT. Nothing like jumping in with two feet. MIA made a new foam interior for his car. It went on a diet and lost a ton of weight. He says it accelerates much faster. The jury is still out on whether it's an improvement or not. Crazy paint and stripes on this car! Jim installed a new lightweight interior in his pink '60 Starliner. That almost completes the car. But his new '62 ultra red BelAir complete with interior sure made everyone's eyes pop! More new stuff to come next month! Merry Christmas to everyone!!!
Started by:
in: S24
- 3
- 2
- 4 months ago
-
64 Impala SS The green colour of this Impala is amazing. A white vinyl roof really sets it off. Drew did a stunning job with the paint. The hood was epoxied in place. Then the extra posts for the static chassis were trimmed off. The rad support was also removed. The chassis was assembled to set the height of the body posts. The post lengths are 31mm front, and 30mm rear. The numbers on the chassis are the tire diameters. The body will sit about 1mm higher with the stainless and urethane washers added. This is the same body height as the Olds 442. The wheel well shape makes it look very different. A thicker washer can be added to the rear body posts to create a little more rake. More to follow. Ken
Started by:
in: Scratch Built Models
- 4
- 5
- 5 months ago
-
66 Corvair Long before I joined S32 and Group 25. I built an AMT 1/25 static 1966 Corvair. I didn't paint it because I didn't know how. I eventually learned how to disassemble and paint cars. It was time to re-visit the old Corvair. It has a new chassis with a corrected wheelbase.
Started by:
in: Scratch Built Models
- 3
- 3
- 6 months ago
-
62 Bel Air, Bubble Top The bubble tops were interesting cars. I would hate to flip one in an accident. But they sure looked cool. Here are the parts. The inspiration for this build came from these photos. This is what the test looked like before the body posts were installed. The body still needs the chrome strip going the full length of the car. I'll attempt that another day when I feel brave. A full interior made of card stock is next. Thank you kindly for looking. Ken
Started by:
in: Scratch Built Models
- 3
- 2
- 8 months ago
-
S24 Aug, 19/23 I was able to take a few pics before everyone left for the day. The field is growing. Chris and Drew's cars should both be ready for the next S24 event.
Started by:
in: S24
- 1
- 0
- 8 months ago
-
S24 Runabout Sessions Gents, Future S24 runabout sessions will no longer require registration. Please understand that these sessions are for active members of Scratch32. Anyone without a Scratch32 account who might be interested in participating should contact either myself or Ken. Normally these sessions will be held once a month on a Saturday but there will be the odd switch to a Sunday due to scheduling constraints. Looking ahead we will begin racing our large scale (1:25) Boulevard Cruisers. If you have more than one model you can enter and race each one as a separate entry (numbers permitting). For info on class requirements please check the other threads in this subforum or just ask us. Eventually we'll post class criterium in accordance with the suggestions in those threads. If you do not have time to build your own chassis but are interested in participating please contact Ken to commission one of his KRZ chassis. Cheers!
Started by:
in: S24
- 2
- 3
- 9 months ago
-
1965 Impala Super Sport This pre-painted and fully assembled static model came from a Group25 flea market. It was a quick test to see how these large cars would run at Nova Ridge. It was quickly turned into a slot car test bed. My humble apologies. The paint is ugly. But it passed the test. With the slot car test a complete success. It was time to freshen up the body. Off with the old paint. A full interior made of paper is next. Thanks for looking. Ken
Started by:
in: Scratch Built Models
- 3
- 4
- 9 months ago
Viewing 8 topics - 1 through 8 (of 8 total)
-
