Viewing 7 topics - 1 through 7 (of 7 total)
    • Topic
    • Voices
    • Replies
    • Last Post
    • Upcoming ’70/’71 Targa Florio Not sure where to put this as there does not seem to be an 'Upcoming Events' Forum, so 'here' it is. Looks like another great event coming up soon, the '70/'71 Targa Florio!! Authentic livery specific!! An era when some of my favourite cars (Alfa's and Porsche's, big surprise there) and drivers (Vic Elford, Jo Siffert, Brian Redman, Masten Gregory, Pedro Rodriguez, Jo Bonnier, Mike Parkes, ..... ) were dominating. (Not showing my age am I??) To that end, so far I've one of each, the #20 Porsche 908/3 driven by Elford/Herrmann (what a great livery for that car) and the #2 Alfa T33/3 driven by Adamich/Lennep to a 2nd place in 1971. (Red, but what else for a factory Alfa) The Porsche is a basically stock Fly with gear and tires, very nice to drive but a bit limited by it's motor! The Alfa is a great car -GLH- and if Mr. 2.4 doesn't have an appropriate car perhaps he will race it for me!!?? See you all there.

      Started by: Avatar photoMiA in: R32

    • 3
    • 8
    • 1 month ago

      Arthur

    • Shelby GT-350 I started this car before I had proper direction. A newbie mistake if you will. I did not realize when I chose the "Candy Lime Green" colour that S32 Sportscar class stops at 1965. After a little bit of digging. I found a 1966 Shelby GT-350 that was entered in the 1967 Targa Florio (#210). A scarce American Mustang among a field of mostly European cars. It didn't make the race due to an accident during practice. It became a one-of-a-kind GT-350 BBQ. There are very few pictures of this car simply because it didn't race. This Shelby was all white. After taking 3-days to remove some really nice paint. The "Candy Lime Green" Shelby became all white. The chassis. I put a little more effort into manipulating the rear of the chassis so it tucks under the rear valance. Measure twice, cut once. The Shelby fits in the GT+2.0 class and requires a Scalex 18k motor. I went with 9x28 gears with an offset crown to keep the CG as low as possible. You can still see hints of green under the body. Hard to get it all out. The chassis tucks nicely under rear valance. It's a tight fit. The car came with black wheels. Inserts are D'Art 5-spokes. The car sits fairly low. The body could have gone even lower. But it's my humble opinion that it would not improve the look even though there might be a slight handling improvement to lowering it further. It's very difficult see the chassis under the body unless you lay your eye on the track. Mission accomplished in my books. The car has body-float.The tires don't rub on the fenders even at the extreme flex of the body-float. But they sure can't get any closer than they already are. It should be ready for the next Targa Florio. Thanks for looking.

      Started by: Avatar photoKen in: Scratch Built Models

    • 3
    • 5
    • 3 years ago

      Avatar photoKen

    • 1971 Targa Florio video Here's 31-minutes of the 1971 Targa we all know and love. Stick with it through the slow parts. You'll probably learn a little Italian before the end of the video. Nice interview with Nino Vaccarella. A few club members might recognize their liveries. The faster cars taking off from the starting line are insane! :yahoo: https://www.facebook.com/GentlemenDriversASD/videos/215963979626676/ Cheers, Ken

      Started by: Avatar photoKen in: Historical 1:1

    • 2
    • 1
    • 3 years ago

      Arthur

    • Morris Mini Cooper I found a Morris Mini Cooper in the 1972 Targa Florio. I also found an appropriate car to get this project off to a good start. As you can see by the photo on the right, the car is "Plum Crazy Purple" in colour. That should be a cool addition to the other liveries. The drivers for car #51 were Matteo Sgarlata and Joe Anastasi. Class = S1.6. Sponsored by = STP. I need to open the wheel openings in the fenders to fit the 13"-inch wheels/tires. That will give me an opportunity to make those crazy looking fenders. The motor is a tight fit with the stock interior. I will need to get very creative with this little car if I want to lower it with bigger wheels, and still keep an interior with a driver. Fun looking car. It was a nice surprise to find out it has working head lights and tail lights. Since this build is not about speed. I'm going to try and keep them. Look out green Giliberti cause a purple Mini will be on the hunt! All in good fun of course.

      Started by: Avatar photoKen in: Scratch Built Models

    • 4
    • 15
    • 4 years ago

      Avatar photoKen

    • Larry's Opel GT Hello fellow racers. Larry has been having some ipad troubles posting pics to start his Opel GT build thread. I offered to get the ball rolling for his first build. He built it for, and raced it at the last Targa Florio. The following are quotes from Larry. So to start I researched as many angles of the car as I could. I sanded down the fender well lip so the fender was flatter so my flare would sit flatter at the back to the body when glued. I stuck painters tape to the fenders and traced where the door jam was, where the front bumper came around the side and the outline of the fender itself. Next I glued three pieces of styrene together for each fender. Stuck the tape to the blank and cut it out. Didn’t cut out the wheel opening yet to keep it stable. Sanding and body putty, lastly I cut out the wheel opening to fit the wheels. And then this happened! Way to go Larry! (Those were Ken's words) Please direct your questions and positive comments to Larry for his fine build. :good: Thank you.

      Started by: Avatar photoKen in: Scratch Built Models

    • 3
    • 5
    • 4 years ago

      Anonymous

    • Airfix MGB Sports model I bought this kit at the Torcan model show. The kit dates back to 1967. Nice to find an old gem like this. Worth doing the build. I hope to have it finished by the weekend and race it at the Dale in just under 2-weeks. SP-slow class. Ken  

      Started by: Avatar photoKen in: Scratch Built Models

    • 3
    • 9
    • 5 years ago

      Avatar photoKen

Viewing 7 topics - 1 through 7 (of 7 total)