Topic Tag: S32

Home /
Viewing 9 topics - 1 through 9 (of 9 total)
    • Topic
    • Voices
    • Replies
    • Last Post
    • Spray Booth Number Three My first spray booth was the basement kitchen fan with a big cardboard box. Overspray wasn't an issue since the basement was eventually going to be renovated. I painted about 60+ cars before having to make changes. After the renovations, I moved the spray area closer to the kitchen window. But the fan was actually higher in the room than the kitchen fan, and was less effective even with a much bigger fan. It moved the smelly air out of the room. But the overspray dust was like a cloud slowly moving to the floor. Let's just agree that it was a total failure. I painted one or two HO cars, and decided to undo everything. It was either outside, or nothing now. I needed to use gravity to my advantage. So far it's been working against me. I bought a wardrobe box from U-Haul for $19.95. It measures 24"x24"x48" inches closed. 60" inches tall with the top flaps open. It barely fits in the shower stall. I installed two 6" inch vents at the back to evacuate the fumes. A plywood plate was cut to perfectly fit into the window slot. Two 6" inch metal joiners were glued into the plywood plate for the flexible hose. The shower has a plastic drop-sheet lining the entire thing. You can't be too safe. I have hanging lights on both sides so I can see properly. Blocks were glued to keep the flaps open. The evacuation vents had to be staggered because they didn't quite fit beside each other. When the booth isn't being used. The plate and flexible ductwork are at rest beside the sink. It was finished last night. Ted came over with an unpainted Pioneer Mustang today, and the booth is an absolute success. The overspray cloud falls to the bottom of the box. Nothing escapes into the washroom itself except barely a light smell. You can't smell the fumes outside the washroom door with the door wide open. Perfect. The power for the booth comes from an old 24" inch fan. It moves enough air to easily dilute the fumes. I need to watch that I don't leave it running too long after painting. It removes a lot of warmth from the house very quickly. Thank you very kindly for looking.

      Started by: Avatar photoKen in: How To – Paint It

    • 5
    • 12
    • 6 days ago

      Chris

    • American Thunder Join us for this first running of American Thunder at The Ring - rescheduled for September 23, 2023 @ 9am! To register your eligible models please visit the American Thunder calendar event and fill out the online model registration form for each model. Please remember that it isn't necessary to have a model for every class to participate in this event. Make sure to add photos, historical details and/or a link to your Scratch32 built forum topic within this event thread. See ya'll there! Now get building!!!

      Started by: Arthur in: R32

    • 3
    • 3
    • 1 month ago

      Avatar photof1nutz

    • 59 Eldorado Biarritz Another beautiful Gunze Sangyo kit. "Biarritz" is Cadillac's fancy name for their Eldorado convertible. The same car in a hard-top was called a "Seville". Huge wings were "in style" back in the late 50's. I like the meadowlark yellow on the front of the box. But it's impossible to get that shade of light yellow in a spray can. I would need to move up into an air-gun. The colour below is an older spray paint now discontinued by Testors called "Lime Ice". The large metal flakes make it very 50's era. It suits a "Boulevard Cruiser".

      Started by: Avatar photoKen in: Scratch Built Models

    • 3
    • 9
    • 1 year ago

      Avatar photoKen

    • 59 Fairlane 500 Skyliner – Police car? Art and I recently talked about adding another dimension to the street racing theme. Having a police cruiser to chase the other cars. The chase car gets a head start. You have to stop and count your laps when the police cruiser catches up to you. I'm pretty sure a Skyliner hardtop/convertible was never made into a police cruiser. But it's a 59 Fairlane 500 none the less. I installed the chassis before the rear fender skirts. The body height at the front of the rocker panel is a respectable 3mm. It's even more respectable at 4mm for the rear of the rocker panel. I thought based on the front wheel housing that the car didn't look very low. Then I installed the rear fender skirts. Those added skirts make the back of the car look low. Such is life. The factory hub caps look great on a police car.  

      Started by: Avatar photoKen in: Scratch Built Models

    • 7
    • 27
    • 3 years ago

      Avatar photoJMSracer

    • Jag XK120 Carrera Panamericana This build was inspired by DB's white XK120. He also gave me the body. Thanks Dave! I was looking to build another Carrera Panamericana car. I found a gentleman by the name of Frank Hern that drove an XK120 in the 1952 race. He did not finish due to an accident. It's my least favorite colour. But "British Racing Green" is extemely accurate for the times of the Carrera Panamericana. :wacko: I love the spats! D'Art blue dot tires on old CB wheels. Use what you got!  

      Started by: Avatar photoKen in: Scratch Built Models

    • 4
    • 13
    • 3 years ago

      Avatar photoFelix

    • 66 Shelby Mustang I was asked to build a car for a friend. What better way to pass the time. The body is a Monogram GT-350. I have the exact same car in white. It was a fun way to test the accuracy of the original drawing. The request was "Keep it low, but keep it level". Thanks for looking

      Started by: Avatar photoKen in: Scratch Built Models

    • 2
    • 3
    • 4 years ago

      Avatar photoKen

    • 59 Impala Sports Coupe This is the same brand of kit as the T-Bird I just finished. It was such a pleasure to build the T-Bird that I could not wait to start this one. This is what comes with the kit. These are the parts being used. The kit comes with 4-roof options. Hardtop, soft-top, open back seat, or tonneau cover. F1nutz has the same car in the same colour but his top down. I'm going with the hardtop. This car was painted the same day as the T-Bird (one week ago). The red plastic just didn't have enough shine. This car won't require clear-coat. Pastel colours usually don't. Time to start putting the car together. It will have a full interior up front and a custom sub-woofer deck in the back to hide the motor. I can't get away with using the tonneau cover over the rear seats with the hardtop.

      Started by: Avatar photoKen in: Scratch Built Models

    • 4
    • 12
    • 4 years ago

      Avatar photoKen

    • D'Art Porsche 550 Spyder I painted this car last July. The body should be safe to handle by now. Someone suggested I expand my build threads so others can learn how to duplicate my mistakes. Careful what you wish for.   I measured the wheelbase and mapped out the chassis. Then I installed axle spacers on all 4-corners to help figure out the track width as well as center the chassis to the body when I glue in the body posts. I will remove the rear axle spacers after cutting the axles to length on final assembly. The front axle spacers remain in place to keep the independent wheels centered. 5mm spacing per corner was just right for this combination of parts. The chassis lays down nicely in the body. The tires are touching the inside of the top of the fenders at this point. But avoid the sides of the fenders. The build is self-slamming. I used to scratch my head on how to figure out the length of the posts. Toothpicks are a handy measuring device. I'm looking forward to seeing this car run. This will be the lowest car I've ever built. If this car runs half as good as the RS61? It will be a blast to drive! :yahoo:

      Started by: Avatar photoKen in: Scratch Built Models

    • 3
    • 9
    • 4 years ago

      Avatar photoKen

  •  

Viewing 9 topics - 1 through 9 (of 9 total)