Topic Tag: slot.it

Home /
Viewing 6 topics - 1 through 6 (of 6 total)
    • Topic
    • Voices
    • Replies
    • Last Post
    • 2016 2.4h @ The Ring Looking forward to next weeks event. In an attempt to look like a team, two Porsche's, Shell and F.A.T. Turbo sponsorship. Slightly different shades of red?? I think the Fortuna car is an earlier model. Curious to see how it runs.:yahoo: MiA

      Started by: Avatar photoMiA in: R32

    • 5
    • 8
    • 1 month ago

      Anonymous

    • Group C (GCI) Group C (GCI) v5.0 Eligible Models: Any Slot.It brand inline Group 'C' or 'IMSA' model; ‘Stock’ parts only or identical plastic/resin replacements; Motor: ‘Stock’ White or Orange endbell Slot.It motor; Rear Tires: DArt Club Series D11 or SI0201 Urethane Tires; Minimum overall weight of 80g; Optional modifications: Any Slot.It parts that come standard on any currently eligible model may be used or incorporated into older eligible models (ie. offset pods and offset crown gears, larger diameter wheels, screws with metal washers, set screws and spacers for aligning front axles, etc.). Any aftermarket washers permitted.

      Started by: Arthur in: R32 Class Criterium

    • 1
    • 0
    • 2 years ago

      Arthur

    • Wrong Set Screw w/Slot.It 16mm Anglewinder Gears Just a friendly heads up that I found a Slot.It 16mm anglewinder gear I recently received from slot car corner (which came in the usual slot.it original packaging) contained a 3mm set screw which was not 'cupped' but rather 'flat' tipped. I didn't order more of these gears so I don't know if this might be a one off or not. Normally you wouldn't even notice this. Never use a 'flat' tipped set screw if you intend for your wheel/gear to stay in place - they are however great to use to adjust/set the height of your front axle in any class where this is allowed... ;-)

      Started by: Arthur in: Class Eligible Bits & Pieces

    • 1
    • 0
    • 8 years ago

      Arthur

    • Slot It 2.4h – August 18, 2007 Slot It 2.4h The Ring - August 18, 2007 [pdf-embedder url="http://scale-modeler.ca/wp-content/uploads/2021/11/070818-SlotIt24-SlotTrak-Qualify-Report.pdf" title="070818 SlotIt24 SlotTrak Qualify Report"] [pdf-embedder url="http://scale-modeler.ca/wp-content/uploads/2021/11/070818-SlotIt24-SlotTrak-Race-Results.pdf" title="070818 SlotIt24 SlotTrak Race Results"]

      Started by: Arthur in: R32

    • 1
    • 0
    • 16 years ago

      Arthur

  •  

Viewing 6 topics - 1 through 6 (of 6 total)