Viewing 2 topics - 1 through 2 (of 2 total)
-
- Topic
- Voices
- Replies
- Last Post
-
-
1953 Carrera Panamericana winner Fangio and Bronzoni won the 1953 Carrera Panamericana in their number 36 D24 Lancia. The slow motor classes are some of my favorites so I thought I'd give o'l number 36 a try. When finished this car should qualify for both our 50's sports car and our Carrera Panamericana classes. The body is 3D printed in Elegoo ABS like resin from a file I purchased online. The chassis was designed and printed by me in PLA+ on my FDM printer. The body weighs 10.5 grams and the chassis adds another 5. The D24 has very little front overhang, making designing the chassis and the location of the various front end components a challenge. I will add the body posts and source the images for making the decals next. Cheers Steve
Started by:
in: Scratch Built Models
- 4
- 6
- 1 year ago
-
Motor Restrictions & ‘Slow’ Motor Classes for Scratch32 Parts & manufacturers come and go, especially in this hobby. The lucky few, or sometimes the forward thinking stockpile what is now 'unobtainium' for everyone else. This has already happened with urethane tires. Now it is creating waves regarding motors, in particular 'slow' motors. In the past we've had motors come and go or if they've been around a while get replaced with identical looking faster editions. By now most of us should know that labels and ratings from manufacturers mean nothing and are only useful to identify a motor - that's it. Chris told me 'control the motor and grip and you'll have a level playing field'. I agree. I can control one end of this equation - the grip - by continuing to manufacture a single compound tire, which I've now done for a decade or so. I can also identify the tire with a coloured tamperproof mark - a small coloured dot through the meat of the tire. But motors are a completely different animal. I remember when the NC1 was the 'slow' motor of choice which is now unobtainium. Then I remember when the BWNC1 was the faster 'slow' motor of choice which is now unobtainium. I also remember when the 'Vanski' was the slim can FF050 'slow' motor of choice which is now unobtainium. So we are left with a minefield of replacement 'slow' motors with manufacturers' ratings all over the board. What compounds the issue is that others may scour the internet and then obtain what they claim to be a suitable replacement or in some cases the same thing. Almost always it isn't. I've never seen a double shaft stock 'scaley' motor - but others have made this claim. It isn't always their fault - those selling the 'slow' motors may mislabel or mislead. Those that cannot get a formerly available motor of choice are understandably frustrated. And those who try to help find suitable alternatives usually realize that their time and efforts only lead to disappointment and in some cases open a Pandora's box. Up to now I did believe that the Vanski era would eventually come to a close as these motors were used up, but apparently that is not happening fast enough. Discontent is greater than I thought and appears to be quite widespread. To me one thing is sure - this cyclical pattern of the availability of 'slow' motors will always be a problem. Some are still going to great lengths to band aid 'slow' motor classes by trying to acquire suitable replacements. Those with stockpiles of Vanski motors, or those with an army of models all with Vanski motors, have no interest in seeing this restriction altered or lifted. Is there a solution? I have a solution and I'll get to it next...
Started by:
in: R32 Class Criterium
- 4
- 14
- 6 years ago
Viewing 2 topics - 1 through 2 (of 2 total)
-
