[Arthur]

Modern F1 (F1)

v5.0

• Eligible Models: Any ‘stock’ modern Scalextric (2000 and newer) F1 model
• Motor – must be a ‘stock’ Scalextric S-can or slim motor – whichever came with the model
• Maximum overall width not to exceed 58mm
• Optional Modifications:
  1. Guide – may be replaced by any 1:32 guide and adapter
  2. Rear Wheels – any 12mm (or smaller) wheel may be used – rear suspension detail may be modified to accommodate wheels
  3. Rear Tires – any DArt ‘Club’ series urethane replacement tire
  4. Front Tires – ‘stock’ or any DArt ‘Club’ series urethane replacement tire
  5. Rear Axle – may be replaced by a solid axle
  6. Bushings – rear nylon/plastic bushings may be replaced with bronze/oilite bushings
  7. Weight – may be added anywhere to the chassis or body provided it is concealed by the body – no weight may be added underneath the front wing or underneath the chassis
  8. Spacers/Washers – may be used on the rear axle (inboard or outboard) and on the front axle (outboard only)
  9. Gearing – stock gears may be replaced by any 27T crown gear together with a 9T pinion or any 24T crown gear together with an 8T pinion
  10. Chassis Bracing – The portion from the driver to the rear of the chassis may be braced or strengthened using any material but both chassis and any modification thereto must remain unpainted and not concealed by any substance so that any such modification is clearly visible if the body is removed. Bodies and chassis may not be cut or altered to accommodate bracing

The Happy Canadian Scale Modeler!

Topic