Slot Car Resources

Home / Forum/Slot Car Resources
Helpful resources for slot car modelers in any scale.
  • This forum has 243 topics, 786 replies, and was last updated 5 days ago by Avatar photoKen.
Viewing 8 topics - 1 through 8 (of 8 total)
    • Topic
    • Voices
    • Replies
    • Last Post
    • Forums Gents, Local engagement in the forum spaces is very low. I might try to incorporate some areas into posts or pages as I refocus but if there is anything of particular value to you in a forum please save it for yourself. Cheers!

      Started by: Arthur in: Website Information

    • 1
    • 0
    • 1 week ago

      Arthur

    • Unlimited open class bodies Here's a great source of lexan bodies for "Unlimited Open" class cars. http://www.bettaandclassic.com/index.htm Make sure you have a few minutes to spare before looking. There are a lot of very cool choices. Let me know if anyone wants to place an order with me to save on shipping from the UK? I can't believe that they actually make a 1972 Firenza. My first car.

      Started by: Avatar photoKen

    • 2
    • 1
    • 1 year ago

      Avatar photoGI

    • List of 1/32 static kits Here's a list of various 1/32 kits made over the years. Enjoy! :-) https://www.scalemates.com/search.php?fkSECTION[]=Kits&q=&fkTYPENAME[]=%22Full%20kits%22&fkSCALENORMALISED[]=%221:00032%22&fkCOMPNAME[]=%22Revell%22&fkCOMPNAME[]=%22Palmer%20Plastics%22&fkCOMPNAME[]=%22Premier%22&fkCATNAME[]=%22Cars%22

      Started by: Avatar photoKen

    • 2
    • 1
    • 1 year ago

      Avatar photoPorsche911

    • Motor Testing Many of you have already seen this I'm sure, but for those who haven't and are interested, and as it came up in conversation recently, a link to Bob Livingston's excellent article on motor testing. Scroll down through it and you get a good explanation of setup and how he tested RPM and Torque, and how torque was tested at lower voltages and then given an appropriate multiplying factor. This seemed to be an acceptable practice. If not entirely accurate, results with the same equipment and methodology should at least be relatively accurate. Setup's are relatively easy to duplicate should you be interested in doing it yourself. http://slotcarnews.blogspot.com/2007/02/slot-car-news-motor-list.html If anyone is further interested I could see if I could find the manufacturers graphs showing the same thing wrt torque.

      Started by: Avatar photoMiA

    • 4
    • 3
    • 4 years ago

      Avatar photoPeter Langlois

    • Controller brake pots I just shorted out my controller recently and created a dead spot on the brake pot. After doing some research, this is what I found out. The following is pasted from Andrew Smith, CEO at Professor Motor. One important tech tip to help the brake pot – when finished racing turn the pot always to the “full brake” position so that IF the controller is hooked up incorrectly then the circuit breaker that is on the circuit board will protect the pot – if the brake is not at “full” when a controller is misconnected the short circuit that the pot sees will likely cause damage. No need to add a fuse .. there is already a self resetting electronic circuit breaker that we designed in on the circuit board .. that circuit breaker replaced the fuse that we used to use years ago … but any fuse or breaker is not effective if the pot is partially on (unfortunately) Ken

      Started by: Avatar photoKen

    • 4
    • 3
    • 5 years ago

      Anonymous

    • Slot car travel box I remember showing up for my first race 5-months ago, March 24th at MVL. I had one yellow Slot-It GT40 in a sandwich bag, and had to borrow a controller. I saw racers walking in with custom slot car cases filled with nice cars. My first thought was "What the bleep did I walk into here?" On that note... I saw a bread box on the "Bed, Bath, and Beyond" website.

      Started by: Avatar photoKen

    • 5
    • 11
    • 5 years ago

      Avatar photoMiA

    • Target 100k per Picture For those of you sharing/uploading images - please try to target 100k (or less) for the file size. If you wish to upload anything larger then you will first need to change the format/size/resolution to get it down to a manageable size (ie. a digital photo from my camera can be as large as 4mb each). Cheers - Art

      Started by: Arthur

    • 1
    • 0
    • 8 years ago

      Arthur

    • Uploading Files Images are straightforward but I've added an individual file uploader which will allow us to upload more types of files, such as .pdf and .doc . The only restriction is file size which I've limited to 500k - unfortunately most MSword files well exceed that... Cheers! Art

      Started by: Arthur

    • 1
    • 0
    • 8 years ago

      Arthur

  •  

Viewing 8 topics - 1 through 8 (of 8 total)
  • You must be logged in to create new topics.